Why is My Devolo Wireless Range Repeater Not Extending The Network?
Living in a big area house? Not getting proper range coverage of your wireless router? Just by using a wireless range extender can easily extend the network zone of your router. If you want to use a high speed or wide range coverage you can use a devolo wireless range repeater. It has many advanced features. It covers all the dead zones areas of your house. It will come with dual band frequencies of 2.4ghz and 5ghz. If you wish to extend the network area of your house you must type the default IP Address in the URL box and search for it.
If you are living in a big house and your traditional router is not performing well, Then in this case you can use the devolo repeater. It has many advanced features. You can easily connect your wireless router with the repeater using an ethernet cable and enjoy endless live streaming with full speed internet coverage. In order to complete the devolo wifi extender setup. Need to access the administration login panel.
The devolo range repeater transmits the signal over a large area by covering all the dead zones. If you wish to enjoy a high speed or wide range connection you must need to install the range repeater between your wireless repeater and router. In case to complete the setup you can use a WPS method to set up.
Just by pressing the WPS button for 10 seconds. Your extender will automatically connect with the wireless router by creating a secure connection. But many times user’s will face many kinds of issues like the extender is not connecting with the router or not extending the network. So here are some simple steps to fix it :
Check properly the repeater is connected with the wireless router. All the wires are connected properly to the repeater. If you are using a wireless connection to connect your repeater with the wireless router, You must need to be sure that your repeater is in the range of your wireless router. You can also use a wired connection by connecting with the ethernet cable.
If your wireless router is connected with the repeater. But there is “NO INTERNET” in your router. Then your repeater will not work. You need to ensure that the repeater is powered “ON” and the internet DSL line is properly connected to the internet modem, router. Please remove the network obstacles if there is any placed between your wireless router or repeater. If even the problem is not solved, Simply you can contact the internet service provider and explain your problem to troubleshoot.
Open the admin center of your wireless repeater and check the firmware version. If the firmware is corrupted or outdated. This kind of problem can occur. In order to fix the issue you must update your repeater firmware. Just need to open the official website of your devolo repeater and then download the latest firmware version of your repeater.
Now simply open the admin settings of your wireless repeater and click to the firmware option and then select your downloaded file of your repeater and click to the update. Your repeater will update shortly and you can easily access most advanced features.
Even if all these given steps do not fix your issue, Then you must perform a factory reset. A reset process will clean all the cache of your router as well as set all the settings as default. You must configure your wireless repeater with the router once again after performing a factory reset.
To reset your repeater simply connect the power adaptor into a working electrical outlet and switch it “ON”. Wait for sometime and then press the RESET button. Which is available on the backside of your repeater. You will notice that the LED indicators of your repeater will start to blink randomly that means your repeater is entering factory reset mode and will reset shortly.
Read More Technology Blogs from this available link :- https://www.thepostzilla.com/