The Wavlink WiFi Extender aims to provide you with enhanced and smooth internet connectivity. It helps to access all the corners such as the ground floor, second floor, or the main floor of the house. You just need to plug the Wavlink extender into the power outlet source so that it ensures its continuous access through the outlet. Like it, this is a wifi repeater that you can place anywhere and continue the wifi connection with your existing wifi connection. As mentioned earlier, it helps to boost your wifi speed with a high speed of 300 Mbps at a 2.4 GHz connection.
Also, the Wavlink wifi repeater setup is a five-finger exercise so that you can use it with any standard wireless router. Moreover, it is a combination of wireless or wired connections. It is specially designed to boost the wifi connection for small houses or offices. It allows its user to expand the internet connectivity wherever they want to do so.
Web Page With The Wavlink Wifi Extender IP Address is designed to cover long-range distances within minutes. If you are thinking about using the Wavlink extender for your house to extend the internet connectivity then you can go for it. But it wouldn’t be wrong to say that the users of the Wavlink repeater have some problems during the installation or the setup process. It usually happens because you are not tech-savvy. But you don’t need to worry about anything. As here we will assist you with some basic problems with the Wavlink wifi repeater.
Well, that’s easy to get back the internet connection with the wifi range extender. Generally, you need to check for the internet connection that you have or not. Also, check whether it is working with the computer or any wireless device or not. If not, then read further. Basically, you need to confirm that you have entered the correct wifi network or security password details. Also, check that the password you have entered should be correct or not. Moreover, you also need to check for the WAN port that should be plugged into the correct line port. Also, check for the ethernet port from the wall and the LAN port from the computer device.
Just plug the wireless extender into the wall socket and wait until it establishes the wifi signal. When you see the green LED become stable on the device then it will set up the connection. After that, connect the wireless device to the WAN port of the modem by using the Ethernet cable. Therefore, search for the wireless N connection into the computer or laptop device and then connect to it. Well, it does not require a wifi password. Now simply open the browser and type the default IP address of the Wavlink into the address bar. Once you are on the login page then simply use the admin word into the username and leave the password field blank and click on the login button. Now go to the settings and then click on the AP mode. Thereafter set the wifi password in which you need to set the network name, channel, security mode, security key, and then save the settings.
So whenever you type the default IP address 192.168.10.1 to login to the page then it shows an error. So to avoid this problem check whether you are connected to the wifi wireless on the first connection or not. Also, check that the IP address that you have entered should be correct. As mentioned above you can check the IP address from here by copying it. Make sure that the IP address you should enter into the address bar, not into the search bar. Therefore, tap on the go button, do not click on the search button.
Also, check the setting of the IP address into the computer device. Confirm the settings of the IP address into the wireless client device and set it by obtaining the IP address automatically. If these settings do not work then you can try to log in with a different web browser. But make sure that it should be safe and does not be used by any other local or third party. You can also perform the reset to factory default settings and retry to configure the settings.