Describing Incredible Features of the TPLink Deco M4 System
The Tplink Deco M4 is a whole-home wifi mesh system that surprises you with its limitless performance. You get easily convinced to buy the tp-link mesh system with its incredible and amazing performance. Also, it provides you a seamless network benefit that provides you access throughout the dwelling place. Besides, it has the capability to cover 3000 square feet of area to eliminate all the weak or deal spots from the network surroundings. Moreover, it is a multi-device system that consists of the main wireless router, satellites, or range extenders.
As if, the deco m4 mesh system provides three identical wifi routers. One serves for the main wireless router and another one will directly connect to the modem. Along with that, it has two satellites that are useful to extend the access of the wifi coverage to the entire house. Moreover, the tp-link deco m4 signal source setup is seamless and intuitive. You can simply use the app to get the step-by-step directions to complete the setup of the deco m4 mesh system.
What are the advanced features of the Tplink Deco M4 System?
Well, the advanced features of the Tplink Deco M4 System are you can find under the advanced section menu. So as to configure or to change the settings of the device. You need to visit the tp-link advanced settings. Well, the advanced settings of the tp-link modem consist of various settings. From that, you can customize it according to you.
So firstly, open the deco app on your mobile devices and then log into the tp-link ID or tap to sign up. Thereafter, tap more and then click on the wifi button. Now go to the main wifi settings and then click on the main network, shake to share, guest network, or any of them.
Settings of the Tplink deco m4 main network connection
As you know about TPLink Deco M4 System Features, the tp-link m4 mesh system provides both the networking channels of 2.4 GHz or 5 GHz. Along with the same network name SSID. If you wish to change the 2.4 GHz or 5 GHz networking bands then simply switch to the unwanted wifi band into the app. If you know that some of the models of the tp-link mesh router do not have this useful feature. Then it might be added after the firmware update into the future. Now simply click on the network name and the default password of the tp-link mesh system. In order to change the SSID, password, or security type of the mesh system.
Also, you can hide the network name if you want to do so. In case, you want to change the wireless security type then tap on the security. Then the app will show you whether your model supports WPA2-PSK(AES), WPA2-PSK(AES)+WPA-PSK(TKIP), and None security type or not. After making the desired changes to the settings, click on the Save button. In order to save the changes.
Enabling Guest network feature of the deco m4 whole-home mesh system
As you know the guest network feature allows the visitors to access the network connection, without joining the private network. You can only enable the guest network feature if you have a network connection. Simply open the tp-link app and log in with the tplinkrepeater default password. After the login, click on the More button and then tap on the wifi section.
Therefore, enable the guest network section. If you want to secure the guest network then firstly click on the security type. Now simply enable the 2.4 GHz or 5 GHz networking bands if required. If you want to share internet access then tap on the share button. Just click on the network name, password, and security type to change the settings. After making changes save the settings.
How to control the power LEDs on the TP-Link deco wifi system?
Well, there are two simple ways to control the working of the LEDs on the tplink wireless mesh system. Either you can control through the tp-link app or you need the Amazon Alexa that can operate on your command. Basically, you need to complete the log-in through the Deco app. Therefore, walk through its settings and click on the advanced settings. After there you will find the LED control section.
Now simply switch off the LEDs and the LED light on the device will toggle off. If you want to turn on the LED then switch on the LED and configure it with night mode. After that specify a time at which you want to turn off the LED. Thus, the LED will automatically toggle off in a selected time period.